# $Id: 2d017660d055417e12094fed899246b29ddf0358 $

set_bootloader() {
	case "${BOOTLOADER}" in
		grub)
			set_bootloader_grub
			;;
		grub2)
			set_bootloader_grub2
			;;
		*)
			print_warning "Bootloader ${BOOTLOADER} is not currently supported"
			;;
	esac
}

set_bootloader_read_fstab() {
	local ROOTFS=$(awk 'BEGIN{RS="((#[^\n]*)?\n)"}( $2 == "/" ) { print $1; exit }' /etc/fstab)
	local BOOTFS=$(awk 'BEGIN{RS="((#[^\n]*)?\n)"}( $2 == "'${BOOTDIR}'") { print $1; exit }' /etc/fstab)

	# If ${BOOTDIR} is not defined in /etc/fstab, it must be the same as /
	[ -z "${BOOTFS}" ] && BOOTFS=${ROOTFS}

	echo "${ROOTFS} ${BOOTFS}"
}

set_bootloader_grub_read_device_map() {
	# Read GRUB device map
	[ ! -d ${TEMP} ] && mkdir ${TEMP}
	echo "quit" | grub --batch --device-map=${TEMP}/grub.map &>/dev/null
	echo "${TEMP}/grub.map"
}

set_bootloader_grub2() {
	local GRUB_CONF
	for candidate in \
			"${BOOTDIR}/grub2/grub.cfg" \
			"${BOOTDIR}/grub/grub.cfg" \
			; do
		if [[ -e "${candidate}" ]]; then
			GRUB_CONF=${candidate}
			break
		fi
	done

	if [[ -z "${GRUB_CONF}" ]]; then
		print_error 1 "Error! Grub2 configuration file does not exist, please ensure grub2 is correctly setup first."
		return 0
	fi

	print_info 1 "You can customize Grub2 parameters in /etc/default/grub."
#	print_info 1 "Running grub2-mkconfig to create ${GRUB_CONF}..."
#	grub2-mkconfig -o "${GRUB_CONF}"
	print_info 1 "Running ego boot update to create ${GRUB_CONF}..."
	ego boot update
	[ "${BUILD_RAMDISK}" -ne 0 ] && sed -i 's/ro single/ro debug/' "${GRUB_CONF}"
}

set_bootloader_grub() {
	local GRUB_CONF="${BOOTDIR}/grub/grub.conf"

	print_info 1 "Adding kernel to ${GRUB_CONF}..."

	if [ ! -e ${GRUB_CONF} ]
	then
		local GRUB_BOOTFS
		if [ -n "${BOOTFS}" ]
		then
			GRUB_BOOTFS=$BOOTFS
		else
			GRUB_BOOTFS=$(set_bootloader_read_fstab | cut -d' ' -f2)
		fi

		# Get the GRUB mapping for our device
		local GRUB_BOOT_DISK1=$(echo ${GRUB_BOOTFS} | sed -e 's#\(/dev/.\+\)[[:digit:]]\+#\1#')
		local GRUB_BOOT_DISK=$(awk '{if ($2 == "'${GRUB_BOOT_DISK1}'") {gsub(/(\(|\))/, "", $1); print $1;}}' ${TEMP}/grub.map)
		local GRUB_BOOT_PARTITION=$(($(echo ${GRUB_BOOTFS} | sed -e 's#/dev/.\+\([[:digit:]]?*\)#\1#') - 1))

		if [ -n "${GRUB_BOOT_DISK}" -a -n "${GRUB_BOOT_PARTITION}" ]
		then

			# Create grub configuration directory and file if it doesn't exist.
			[ ! -d `dirname ${GRUB_CONF}` ] && mkdir -p `dirname ${GRUB_CONF}`

			touch ${GRUB_CONF}
			echo 'default 0' >> ${GRUB_CONF}
			echo 'timeout 5' >> ${GRUB_CONF}
			echo "root (${GRUB_BOOT_DISK},${GRUB_BOOT_PARTITION})" >> ${GRUB_CONF}
			echo >> ${GRUB_CONF}

			# Add grub configuration to grub.conf
			echo "# Genkernel generated entry, see GRUB documentation for details" >> ${GRUB_CONF}
			echo "title=Funtoo Linux ($KV)" >> ${GRUB_CONF}
			if [ "${BUILD_INITRD}" = '0' ]
			then
				echo -e "\tkernel /kernel-${FULLNAME} root=${GRUB_ROOTFS}" >> ${GRUB_CONF}
			else
				echo -e "\tkernel /kernel-${FULLNAME} root=/dev/ram0 init=/linuxrc real_root=${GRUB_ROOTFS}" >> ${GRUB_CONF}
				if [ "${PAT}" -gt '4' ]
				then
				    echo -e "\tinitrd /initramfs-${FULLNAME}-${KV}" >> ${GRUB_CONF}
				fi
			fi
			echo >> ${GRUB_CONF}
		else
			print_error 1 "Error! ${BOOTDIR}/grub/grub.conf does not exist and the correct settings can not be automatically detected."
			print_error 1 "Please manually create your ${BOOTDIR}/grub/grub.conf file."
		fi

	else
		# The grub.conf already exists, so let's try to duplicate the default entry
		if set_bootloader_grub_check_for_existing_entry "${GRUB_CONF}"; then
			print_warning 1 "An entry was already found for a kernel/initramfs with this name...skipping update"
			return 0
		fi

		set_bootloader_grub_duplicate_default "${GRUB_CONF}"
	fi

}

set_bootloader_grub_duplicate_default_replace_kernel_initrd() {
	sed -r -e "/^[[:space:]]*kernel/s/kernel-[[:alnum:][:punct:]]+/kernel-${FULLNAME}/" - |
	sed -r -e "/^[[:space:]]*initrd/s/init(rd|ramfs)-[[:alnum:][:punct:]]+/init\1-${FULLNAME}/"
}

set_bootloader_grub_check_for_existing_entry() {
	local GRUB_CONF=$1
	if grep -q "^[[:space:]]*kernel[[:space:]=]*.*/kernel-${FULLNAME}\([[:space:]]\|$\)" "${GRUB_CONF}" &&
		grep -q "^[[:space:]]*initrd[[:space:]=]*.*/initramfs-${FULLNAME}\([[:space:]]\|$\)" "${GRUB_CONF}"
	then
		return 0
	fi
	return 1
}

set_bootloader_grub_duplicate_default() {
	local GRUB_CONF=$1
	local GRUB_CONF_TMP="${GRUB_CONF}.tmp"

	line_count=$(wc -l < "${GRUB_CONF}")
	line_nums="$(grep -n "^title" "${GRUB_CONF}" | cut -d: -f1)"
	if [ -z "${line_nums}" ]; then
		print_error 1 "No current 'title' entries found in your grub.conf...skipping update"
		return 0
	fi
	line_nums="${line_nums} $((${line_count}+1))"

	# Find default entry
	default=$(sed -rn '/^[[:space:]]*default[[:space:]=]/s/^.*default[[:space:]=]+([[:alnum:]]+).*$/\1/p' "${GRUB_CONF}")
    if [ -z "${default}" ]; then
		print_warning 1 "No default entry found...assuming 0"
		default=0
	fi
	if ! echo ${default} | grep -q '^[0-9]\+$'; then
		print_error 1 "We don't support non-numeric (such as 'saved') default values...skipping update"
		return 0
	fi

	# Grub defaults are 0 based, cut is 1 based
	# Figure out where the default entry lives
	startstop=$(echo ${line_nums} | cut -d" " -f$((${default}+1))-$((${default}+2)))
	startline=$(echo ${startstop} | cut -d" " -f1)
	stopline=$(echo ${startstop} | cut -d" " -f2)

	# Write out the bits before the default entry
	sed -n 1,$((${startline}-1))p "${GRUB_CONF}" > "${GRUB_CONF_TMP}"

	# Put in our title
	echo "title=Funtoo Linux (${KV})" >> "${GRUB_CONF_TMP}"

	# Pass the default entry (minus the title) through to the replacement function and pipe the output to GRUB_CONF_TMP
	sed -n $((${startline}+1)),$((${stopline}-1))p "${GRUB_CONF}" | set_bootloader_grub_duplicate_default_replace_kernel_initrd >> "${GRUB_CONF_TMP}"

	# Finish off with everything including the previous default entry
	sed -n ${startline},${line_count}p "${GRUB_CONF}" >> "${GRUB_CONF_TMP}"

	cp "${GRUB_CONF}" "${GRUB_CONF}.bak"
	cp "${GRUB_CONF_TMP}" "${GRUB_CONF}"
	rm "${GRUB_CONF_TMP}"
}
