Initializing cgroup subsys cpuset Initializing cgroup subsys cpuacct Linux version 3.17.1-gentoo (root@N00LL985S3) (gcc version 4.8.2 (Funtoo 4.8.2-r3) ) #1 SMP Thu Oct 16 14:50:28 CEST 2014 e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x000000006deeffff] usable BIOS-e820: [mem 0x000000006def0000-0x000000006defffff] ACPI data BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved Notice: NX (Execute Disable) protection missing in CPU! SMBIOS 2.5 present. DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 e820: update [mem 0x00000000-0x00000fff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable e820: last_pfn = 0x6def0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR variable ranges disabled: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 CPU MTRRs all blank - virtualized system. initial memory mapped: [mem 0x00000000-0x00bfffff] Base memory trampoline at [c009b000] 9b000 size 16384 init_memory_mapping: [mem 0x00000000-0x000fffff] [mem 0x00000000-0x000fffff] page 4k init_memory_mapping: [mem 0x37000000-0x373fffff] [mem 0x37000000-0x373fffff] page 2M init_memory_mapping: [mem 0x30000000-0x36ffffff] [mem 0x30000000-0x36ffffff] page 2M init_memory_mapping: [mem 0x00100000-0x2fffffff] [mem 0x00100000-0x003fffff] page 4k [mem 0x00400000-0x2fffffff] page 2M init_memory_mapping: [mem 0x37400000-0x377fdfff] [mem 0x37400000-0x377fdfff] page 4k BRK [0x0071f000, 0x0071ffff] PGTABLE RAMDISK: [mem 0x37c57000-0x37feffff] Allocated new RAMDISK: [mem 0x37465000-0x377fddfb] Move RAMDISK from [mem 0x37c57000-0x37fefdfb] to [mem 0x37465000-0x377fddfb] ACPI: Early table checksum verification disabled ACPI: RSDP 0x000E0000 000024 (v02 VBOX ) ACPI: XSDT 0x6DEF0030 000034 (v01 VBOX VBOXXSDT 00000001 ASL 00000061) ACPI: FACP 0x6DEF00F0 0000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061) ACPI: DSDT 0x6DEF0410 001B96 (v01 VBOX VBOXBIOS 00000002 INTL 20100528) ACPI: FACS 0x6DEF0200 000040 ACPI: SSDT 0x6DEF0240 0001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528) 870MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 BRK [0x00720000, 0x00720fff] PGTABLE Zone ranges: DMA [mem 0x00001000-0x00ffffff] Normal [mem 0x01000000-0x377fdfff] HighMem [mem 0x377fe000-0x6deeffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00001000-0x0009efff] node 0: [mem 0x00100000-0x6deeffff] On node 0 totalpages: 450190 free_area_init_node: node 0, pgdat c064c440, node_mem_map f66a5020 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3998 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 223230 pages, LIFO batch:31 HighMem zone: 1742 pages used for memmap HighMem zone: 222962 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x4008 smpboot: Allowing 1 CPUs, 0 hotplug CPUs Found and enabled local APIC! PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] e820: [mem 0x6df00000-0xfffbffff] available for PCI devices setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 PERCPU: Embedded 13 pages/cpu @f668f000 s30144 r0 d23104 u53248 pcpu-alloc: s30144 r0 d23104 u53248 alloc=13*4096 pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 448414 Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86-3.17.1-gentoo real_root=/dev/sda3 root=/dev/sda3 rootfstype=xfs PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing CPU#0 Initializing HighMem for node 0 (000377fe:0006def0) Initializing Movable for node 0 (00000000:00000000) Memory: 1775760K/1800760K available (3593K kernel code, 326K rwdata, 1532K rodata, 512K init, 244K bss, 25000K reserved, 891848K highmem) virtual kernel memory layout: fixmap : 0xfff17000 - 0xfffff000 ( 928 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc0656000 - 0xc06d6000 ( 512 kB) .data : 0xc0482959 - 0xc06548c0 (1863 kB) .text : 0xc0100000 - 0xc0482959 (3594 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 NR_IRQS:2304 nr_irqs:24 0 CPU 0 irqstacks, hard=f6006000 soft=f6008000 Console: colour VGA+ 80x25 console [tty0] enabled tsc: Fast TSC calibration using PIT tsc: Detected 3192.175 MHz processor Calibrating delay loop (skipped), value calculated using timer frequency.. 6384.35 BogoMIPS (lpj=31921750) pid_max: default: 32768 minimum: 301 ACPI: Core revision 20140724 ACPI: All ACPI Tables successfully acquired ACPI: setting ELCR to 0200 (from 0e00) Security Framework initialized Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) mce: CPU supports 0 MCE banks Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 Freeing SMP alternatives memory: 32K (c06d6000 - c06de000) smpboot: weird, boot CPU (#0) not listed by the BIOS smpboot: SMP motherboard not detected Enabling APIC mode: Flat. Using 0 I/O APICs smpboot: SMP disabled Performance Events: unsupported p6 CPU model 37 no PMU driver, software events only. x86: Booted up 1 node, 1 CPUs smpboot: Total of 1 processors activated (6384.35 BogoMIPS) devtmpfs: initialized xor: measuring software checksum speed pIII_sse : 1848.400 MB/sec prefetch64-sse: 1959.600 MB/sec xor: using function: prefetch64-sse (1959.600 MB/sec) NET: Registered protocol family 16 cpuidle: using governor ladder cpuidle: using governor menu ACPI: bus type PCI registered dca service started, version 1.12.1 PCI: PCI BIOS revision 2.10 entry at 0xfda26, last bus=0 PCI: Using configuration type 1 for base access raid6: mmxx1 4013 MB/s raid6: mmxx2 4334 MB/s raid6: sse1x1 3469 MB/s raid6: sse1x2 4066 MB/s raid6: sse2x1 6296 MB/s raid6: sse2x2 7409 MB/s raid6: using algorithm sse2x2 (7409 MB/s) raid6: using ssse3x1 recovery algorithm ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: SCI (ACPI GSI 9) not registered ACPI: Executed 1 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140724/hwxface-580) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140724/hwxface-580) ACPI: (supports S0 S5) ACPI: Using PIC for interrupt routing PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) acpi PNP0A03:00: host bridge window [mem 0x6df00000-0xffdfffff] (ignored) PCI: root bus 00: using default resources acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a pci 0000:00:01.1: reg 0x20: [io 0xd000-0xd00f] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000 pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff pref] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 pci 0000:00:03.0: reg 0x10: [mem 0xf0000000-0xf001ffff] pci 0000:00:03.0: reg 0x18: [io 0xd010-0xd017] pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000 pci 0000:00:04.0: reg 0x10: [io 0xd020-0xd03f] pci 0000:00:04.0: reg 0x14: [mem 0xf0400000-0xf07fffff] pci 0000:00:04.0: reg 0x18: [mem 0xf0800000-0xf0803fff pref] pci 0000:00:05.0: [8086:2415] type 00 class 0x040100 pci 0000:00:05.0: reg 0x10: [io 0xd100-0xd1ff] pci 0000:00:05.0: reg 0x14: [io 0xd200-0xd23f] pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310 pci 0000:00:06.0: reg 0x10: [mem 0xf0804000-0xf0804fff] pci 0000:00:07.0: [8086:7113] type 00 class 0x068000 pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601 pci 0000:00:0d.0: reg 0x10: [io 0xd240-0xd247] pci 0000:00:0d.0: reg 0x18: [io 0xd250-0xd257] pci 0000:00:0d.0: reg 0x20: [io 0xd260-0xd26f] pci 0000:00:0d.0: reg 0x24: [mem 0xf0806000-0xf0807fff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11) ACPI: Enabled 1 GPEs in block 00 to 07 vgaarb: setting as boot device: PCI:0000:00:02.0 vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:02.0 SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] e820: reserve RAM buffer [mem 0x6def0000-0x6fffffff] Switched to clocksource refined-jiffies pnp: PnP ACPI init pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active) pnp 00:02: Plug and Play ACPI device, IDs PNP0400 (active) pnp: PnP ACPI: found 3 devices Switched to clocksource acpi_pm pci_bus 0000:00: resource 4 [io 0x0000-0xffff] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] NET: Registered protocol family 2 TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP: reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 pci 0000:00:00.0: Limiting direct PCI/PCI transfers pci 0000:00:01.0: Activating ISA DMA hang workarounds pci 0000:00:02.0: Video device with shadowed ROM ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 3684K (f7465000 - f77fe000) platform rtc_cmos: registered platform RTC device (no PNP device found) apm: BIOS not found. futex hash table entries: 256 (order: 2, 16384 bytes) audit: initializing netlink subsys (disabled) audit: type=2000 audit(1418223668.579:1): initialized HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) squashfs: version 4.0 (2009/01/31) Phillip Lougher msgmni has been set to 1733 async_tx: api initialized (async) bounce: pool size: 64 pages Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) start plist test end plist test Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found ioatdma: Intel(R) QuickData Technology Driver 4.00 brd: module loaded loop: module loaded Loading iSCSI transport class v2.0-870. iscsi: registered transport (tcp) i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 hidraw: raw HID events driver (C) Jiri Kosina TCP: cubic registered NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Freeing unused kernel memory: 512K (c0656000 - c06d6000) traps: mount[461] general protection ip:80e41eb sp:bfc16dc4 error:0 in busybox[8048000+152000] traps: mount[469] general protection ip:80e41eb sp:bfd6fa6c error:0 in busybox[8048000+152000] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 tsc: Refined TSC clocksource calibration: 3192.133 MHz traps: fgrep[986] general protection ip:80e41eb sp:bfb7e29c error:0 in busybox[8048000+152000] traps: mount[987] general protection ip:80e41eb sp:bf8f6bf4 error:0 in busybox[8048000+152000] traps: fgrep[991] general protection ip:80e41eb sp:bf9dbd2c error:0 in busybox[8048000+152000] traps: mount[993] general protection ip:80e41eb sp:bfd098b4 error:0 in busybox[8048000+152000] traps: mount[996] general protection ip:80e41eb sp:bfc119f4 error:0 in busybox[8048000+152000] Switched to clocksource tsc ahci 0000:00:0d.0: version 3.0 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ahci 0000:00:0d.0: SSS flag set, parallel bus scan disabled ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc scsi host0: ahci ata1: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 11 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133 ata1.00: 42334208 sectors, multi 128: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 42334208 512-byte logical blocks: (21.6 GB/20.1 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk ata_piix 0000:00:01.1: version 2.13 scsi host1: ata_piix scsi host2: ata_piix ata2: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14 ata3: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15 ata3.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133 ata3.00: configured for UDMA/33 scsi 2:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5 sr 2:0:0:0: [sr0] scsi3-mmc drive: 32x/32x xa/form2 tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 2:0:0:0: Attached scsi generic sg1 type 5 NCR53c406a: no available ports found scsi: Detection failed (no card) GDT-HA: Storage RAID Controller Driver. Version: 3.05 qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options Failed initialization of WD-7000 SCSI card! NCR53c406a: no available ports found imm: Version 2.05 (for Linux 2.4.0) sym53c416.c: Version 1.0.0-ac Fusion MPT base driver 3.04.20 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SPI Host driver 3.04.20 Fusion MPT FC Host driver 3.04.20 Fusion MPT SAS Host driver 3.04.20 3ware Storage Controller device driver for Linux v1.26.02.003. 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. HP CISS Driver (v 3.6.26) Adaptec aacraid driver 1.2-0[30300]-ms megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) megasas: 06.803.01.00-rc1 Mon. Mar. 10 17:00:00 PDT 2014 qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.08-k. Emulex LightPulse Fibre Channel SCSI driver 10.2.8001.0. Copyright(c) 2004-2014 Emulex. All rights reserved. aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver usbcore: registered new interface driver usb-storage uhci_hcd: USB Universal Host Controller Interface driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver usbcore: registered new interface driver usbhid usbhid: USB HID core driver device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com md: raid10 personality registered for level 10 md: linear personality registered for level -1 md: multipath personality registered for level -4 JFS: nTxBlock = 8192, nTxLock = 65536 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. SGI XFS with ACLs, security attributes, realtime, no debug enabled fuse init (API version 7.23) e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:9f:ae:99 e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered traps: mdev[10914] general protection ip:80e41eb sp:bfe2d5cc error:0 in busybox[8048000+152000] XFS (sda3): Mounting V4 Filesystem XFS (sda3): Ending clean mount traps: mount[10925] general protection ip:80e41eb sp:bfc83f24 error:0 in busybox[8048000+152000] random: nonblocking pool is initialized UDF-fs: warning (device sda3): udf_fill_super: No partition found (2) XFS (sda3): Mounting V4 Filesystem XFS (sda3): Ending clean mount traps: mount[10942] general protection ip:80e41eb sp:bf88f674 error:0 in busybox[8048000+152000]